Material Handling

We devise the right solution for you with our material handling to achieve a satisfied result.

Material handling to achieve a satisfied result

Delivering a tube, saw a tube or marking a tube.

You can think of delivering a tube to the bending machine by means of a loading arm that obtains the tubes from 1 of our bunkers.

And then, for example, the following operations can be chosen as drilling, chopping, sawing, punching, marking, deburring, weld seam detection, end forming, etc.

Material bunker for long length pipes.

This bunker is equipped with a system that ensures that the tubes are offered one by one to the next step in the process.

The bunker can also be equipped with weld seam detection which ensures that the tube can be offered with the weld seam always in the same position.

Paternoster bunker for short pipes up to 3000mm

This compact bunker is equipped with a system that ensures that the tubes are offered one by one to the next step in the process.

The bunker can also be equipped with weld seam detection which ensures that the tube can be offered with the weld seam always in the same position.

It is a unique solution in combination with our loading arm for offering tubes for the bending machine.

Loading arm

The loading arm is the connection between the bunker and the bending machine.

It is servo-electrically driven so correct positioning is guaranteed.

You can position a loading arm so that it loads the tube in front of the bending head or behind the bending head this depends on your product and environment.

Robot

We can apply a robot for loading a tube into the machine and for removing a bent product from the machine.

We ensure that the robot can be properly programmed and correctly correspond to the machine.

There are several brands of robots that we have experience with. For example, KUKA and FANUC

Saw-unit

Our specially designed saw unit is the ideal solution for cutting curved products to the right size. 

This saw unit is moved horizontally so that there is complete freedom around the bending head while bending a product.

While bending a new product, this sawing unit transports the previous product to the right place.

Chopper

The chopper is used to chop through a pipe quickly and precisely.

The chopper can be built separately in a production cell but also on the bending machine so that, for example, chopping can be done immediately after bending a product.

Almost all materials can be chopped with it.

Drilling unit

A drilling unit can be placed in a production cell or on the machine. 

This drilling machine can drill the holes in the straight lengths and bends.  

Positioning is done on the machine with the servo axes for bending, longitudinal displacement and spatial rotation.

In a production cell, this can be done by means of a robot, for example.

Weld seam detection

The weld seam detection ensures that the weld is found correctly and then it is in the correct position every time.

This weld seam detection can be placed in a production cell intergrated in the bunker or on the bending machine.

Download brochure

Feel free to download our brochure of the production lines. Also let us know if we may contact you to tell you more about production lines.

May we contact you?

Do you want to do an information request?

We are happy to help you with your challenge. Let us know what you need and we’re happy to make an offer.