Production
lines
Dynobend goes beyond the conventional understanding of tube bending machines and offers comprehensive solutions that improve the entire production process.
From concept to integration
individual requirements and custom made
From concept development to integration and commissioning, Dynobend partners with its customers to ensure that individual requirements are met and exceeded.
With Dynobend, customers not only experience top quality in tube processing, but also the future of customised manufacturing technology.
This installation FB28S was custom built for a customer who manufactures press fittings till Ø28mm
This compact machine has the advantage of not having large dimensions.
Products that have already undergone shaping at both ends are bent afterwards.
This machine is fast and will surprise you with the numbers that can be made per hour.
This installation was custom built for a customer to manufacture parts for stairlifts.
This fully electric machine CM766 can bend tube parts counterclockwise or clockwise.
Tube dimensions Ø76.1 x 4
Bundles of tubes are placed in the bunker, after which it undergoes operations such as drilling, marking, bending and cutting the parts to size.
Thanks to our smart software, the percentage of waste has been reduced to a minimum.
This installation was custom built for a customer who bends profiles for crane cabins and tracked vehicles.
This powerful multi-radius machine can bend and roll up to a profile size of 125mm with a maximum radius of 350mm for bending.
It is a fully electric machine with a bending momentum up to 105000Nm and a power booster of up to 200KN during the bending process.
The profiles are automatically positioned in the correct direction and presented to the bending machine with a loading arm, after which the profile is bent as desired
This installation was custom built for a customer to manufacture parts for stairlifts.
This fully electric machine CB90 can bend tubes op to Ø90mm
Tube dimensions Ø80 x 3
With our nesting software, the optimal result is achieved so that a minimum of residual length remains.
Tubes are placed in a bunker and the correct length is cut. After this, it is placed in the bending machine with a loading arm where the tube is first marked and then bent.
Download brochure
Feel free to download our brochure of the production lines. Also let us know if we may contact you to tell you more about production lines.
Do you want to do an information request?
We are happy to help you with your challenge. Let us know what you need and we’re happy to make an offer.
